lasma cutters, based on Inverter technology, guarantee accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The front panel is provided with clear and simple graphics for the adjustment of the cutting current and to indicate the intervention of any of the internal safety devices. Designed to work with either PT, ST or PH torches according to your cutting requirements. The use of ST/PH torches improves the maximum cutting performance and increases the speed at which the cutting can be achieved. Suitable also for cutting with small CNC machines thanks to the specifically designed interface (connector on the back side for torch trigger, arc on signal and arc voltage reference)
Input voltage (3ph) | (3ph) 400V 50/60Hz |
Power 60% | 40 KVA |
Max Input current | 27 A |
No load output voltage | 360 V |
Range | 20 ÷ 160 A |
Cutting current | 60% 160 A 100% 120 A |
Insulation | H |
Protec. Degree | IP22S |
Machine (LxWxH) | 790x380x620 mm |
Package (LxWxH) | 815x390x630 mm |
Weight box/net | 55,0 / 52,0 kg |
Code | 99835024K |
CUTTING DATA | |
---|---|
Plasma torch (Contact Cutting) |
PH160 • 6pin |
Code • 23010135 | |
160 A | |
Starter Kit | 23015482B |
Clean cutting capacity 25cm/min | 45 mm |
Max cutting capacity | 60 mm |
Severance | 75 mm |
Pierce | 25 |
Required air capacity | 400 l/min @ 5,5 bar |
At your service for everything!