Microprocessor-controlled welding inverter suitable for DC controlled MIG/MAG which guarantees excellent stability of the welding arc and no welding spatters. In MIG mode it allows either manual or fully synergic welding. Regulation of the slope-up motor, automatic soft start wire feed control of the arc. Its simplicity and versatility make it perfect for use in body shops, workshops and for all maintenance tasks. All of the functions can be easily selected on the front panel. Digital displays show the welding voltage and current and all the parameters selected. This model is the wheel-based version and is fitted to accept reels with diameter of 300mm and 200mm.
Input voltage (3ph)  |
400V ± 10% 50/60Hz |
| MIG | |
|---|---|
| Power 60% | 4,8 KW |
No load output voltage  |
30 V |
| Amp. min-max | 30 ÷ 250 A |
| Duty Cycle 40° | 250A @ 35% 190A @ 60% 150A @ 100% |
| Steel | Ø 0,8 ÷ 1,0 mm |
| Stainless Steel | Ø 0,8 ÷ 1,0 mm |
| Alumnium | Ø 1,0 ÷ 1,2 mm |
| Flux core | Ø 1,0 ÷ 1,2 mm |
| CuSi3 | Ø 0,8 mm |
| Insulation | H |
| Protec. Degree | IP23S |
Machine (LxWxH)  |
450x840x710 mm |
Package (LxWxH)  |
365x895x650 mm |
Weight box/net  |
32 / 30 Kg |
| Code | 99825017K |
cod. 22110007
cod. 33805003
cod. 33805005
cod. 33805104
cod. 33805101
cod. 33805067
cod. 33805071
cod. 21905134
cod. 21905151
cod. 21905100
cod. 21905125
cod. 21905135
cod. 21905136
At your service for everything!
