Plasma cutters, based on Inverter technology, guaranteeing accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The available cutting modes are: continuous, grid, gouging and CNC. Possibility to set the cutting current and to adjust the air pressure in a simple and precise way thanks to the handy knob. The EVO plasma cutters can signal the lacking or excessive air pressure through dedicated LEDs located on the front panel.
Plasma torch  |
H.70 (45 A) · H.FIT | |
Input voltage (1ph)  |
115V - 50/60Hz | 230V - 50/60Hz |
| Power 60% | 2,5 KVA | 5 KVA |
| Max input current | 26 A | 25 A |
No load output voltage  |
270 V | 270 V |
| Range | 20 ÷ 25 A | 20 ÷ 45 A |
| Cutting current | 25A @ 40% 20A @100% |
45A @ 50% 32A @ 100% |
| Clean cut 25cm/min | 8 mm | 15 mm |
| Max Cut | 11 mm | 20 mm |
Severance  |
12 mm | 22 mm |
Pierce  |
12 mm | 12 mm |
| Required air capacity | 220 l/min @ 5 bar | |
| Insulation | H | |
| Protec. Degree | IP22S | |
| Power Source (LxWxH) | 195x495x395 mm | |
| Weight box (machine + torch) /net | 20,1 / 19,1 kg | |
| Code | 99830032K | |
cod. 23010162
cod. 23015563BH
cod. 23015354BH
cod. 23015355BH
cod. 23015357BH
cod. 23015358BH
cod. 23015359BH
cod. 23015306
cod. 23015404
cod. 22905048
cod. 22905092
cod. 22905093K
cod. 99900258A
At your service for everything!
