Plasma cutters, based on Inverter technology, guaranteeing accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The available cutting modes are: continuous, grid, gouging and CNC. Possibility to set the cutting current and to adjust the air pressure in a simple and precise way thanks to the handy knob. The EVO plasma cutters can signal the lacking or excessive air pressure through dedicated LEDs located on the front panel.
Plasma torch  |
H.70 (45 A) · H.FIT | |
Input voltage (1ph)  |
115V - 50/60Hz | 230V - 50/60Hz |
| Power 60% | 2,5 KVA | 5 KVA |
| Max input current | 26 A | 25 A |
No load output voltage  |
270 V | 270 V |
| Range | 20 ÷ 25 A | 20 ÷ 45 A |
| Cutting current | 25A @ 40% 20A @100% |
45A @ 50% 32A @ 100% |
| Clean cut 25cm/min | 8 mm | 15 mm |
| Max Cut | 11 mm | 20 mm |
Severance  |
12 mm | 22 mm |
Pierce  |
12 mm | 12 mm |
| Required air capacity | 220 l/min @ 5 bar | |
| Insulation | H | |
| Protec. Degree | IP22S | |
| Power Source (LxWxH) | 195x495x395 mm | |
| Weight box (machine + torch) /net | 20,1 / 19,1 kg | |
| Code | 99830032K | |
At your service for everything!
